Castcode Security¶

The Castcode provides additional security against unauthorized screen mirroring by requiring each Guest to enter a four-digit code to be allowed to cast content. This allows you to ensure that only participants in the same room can mirror to the large screen. The following settings are available:

• OFF - No Castcode is required.
• Random - Random (updates automatically on power up or reboot).
• Fixed - Specify a fixed castcode.

The castcode is displayed at the top center of the start page:

When the enddevice correctly enters the castcode, screen mirroring is authorized to start:

What streaming protocols does Castcode support?¶

The castcode is requested on an application to send from the following streaming protocols or applications:

• EZCast Pro software for Windows and macOS.
• EZCast Pro app for Android and iOS
• AirPlay on iOS and macOS

What streaming protocols does Castcode not support?¶

Due to a limitation of protocols, the castcode cannot be supported under the following streaming protocols. Nevertheless, you can protect against unauthorized screen casting:

• Google Cast
• Miracast

Google Cast¶

Currently there is no castcode functionality within the Chromecast protocol. However, you do have the ability to use the EZCast Pro app/software the Host Control feature to protect against unauthorized screen mirroring. When a Chromecast device attempts to cast, the cast request must be approved by the moderator (Host):

.

A comprehensive user guide on Host Control can be found here.

Miracast¶

The Miracast protocol does not support a four-digit cast code, but an eight-digit pin code. You can enable this feature in Advanced Settings:

When a Miracast device sends EZCast Pro a request to mirror, the eight-digit pin code appears in yellow at the top of the landing page. This pin must be entered on the enddevice before screen mirroring is allowed to begin.

How to Enable Castcode¶

Enable the Castcode feature in Advanced Settings in the EZCastPro software for Windows and macOS or in the app for Android and iOS.

Open Advanced Settings¶

• Open the software EZCastPro on your device and select the Pro Box II from the device list.

• On Windows/macOS select Advanced Settings.

• On iOS/Android, select the Settings button on the top left, then tap Advanced:

Log in as Admin¶

• Enter the admin password and click OK to log in. By default, the password is 000000. If this password is not accepted reset the device via the reset-switch.

Enable Castcode¶

• Select Device Management from the menu:

• Select the menu item Castcode Control:

• Select the desired setting:

• You must now restart the Pro Box II in order to activate Castcode. In the menu select Restart.

• Then select the Restart button again.